Have the bosses, purchasers, and engineers of water pump factories been tormented by bearings and lost sleep? The customers complained about the loud noise, water leakage, and frequent shutdown of the newly delivered water pumps. The orders were about to be cancelled, and the after-sales costs soared. Are you upset?

A few days ago, a water pump factory specializing in water treatment equipment was in a hurry. They had just developed a high-power circulating water pump, which was intended to open up the high-end market. As a result, during the trial operation, the noise of the water pump was so loud that people's ears hurt, and there were frequent problems of shaft seal leakage and bearing jamming. The initial diagnosis was that the bearing was the cause. The water pump manufacturer was helpless. He searched for Kent Bearings in short videos and contacted us. When the technicians of Kent Bearings arrived at the scene and disassembled it, they found that the bearings used in the water pumps had a big problem. The original bearings were not accurate enough, and the raceways were not flat enough, which caused the water pumps to vibrate violently during operation. The sealing structure design was unreasonable, and moisture and dust penetrated into the bearings through the gaps, accelerating rust. The lubrication performance was also not up to standard, and the grease quickly failed in high temperature and high humidity environments. Kent Bearings has deep groove ball bearings specially developed for water pumps. Starting from the raw materials, we use highly rust-proof special steel, combined with a double-layer labyrinth seal structure, to maximize the waterproof and dustproof effect. The high-precision grinding process allows the raceway and steel ball to fit perfectly, and the vibration when the water pump is running is almost negligible. Special grease can also provide long-term lubrication in humid environments. After reinstalling the machine, the noise of the water pump was greatly reduced, and it ran continuously for 72 hours without any trouble! Compared with ordinary bearings, which have poor precision, weak sealing, and short life, they are time bombs when used in water pumps. Frequent rework and replacement of bearings will not only increase costs, but also ruin reputation. Kent bearings, with high precision, strong sealing, and super durability, can adapt to various complex working conditions, helping you reduce after-sales costs and retain high-quality customers.